Camco RhinoFLEX kit
Best first kit: two 10-foot hoses, swivels, a clear elbow, and a 4-in-1 dump adapter.
Sewer · 2026
As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure. Prices change, so we link out instead of printing them.
The hose is not the part that usually leaks. The bayonet does, because it was twisted, the gasket was flat, or the hose was stretched so tight the fitting became a lever. Buy a kit with swivel ends, give it slack, and support the run so solids are not sitting in a belly.
Both kits we recommend are 20 feet made of two 10-foot sections, with a clear elbow so you can see the tank finish, and caps for storage. Twenty feet is a campground number. A park dump station can ask for more. The length calculator is there so you measure the path before you discover the inlet is 8 feet past the end of the hose.
Best first kit: two 10-foot hoses, swivels, a clear elbow, and a 4-in-1 dump adapter.
The same layout if a bulkier fitting will not fit your hose bay.
The support that keeps a 20-foot hose from sagging. The hose is not the support.
| Product | Score | Best for | Listing checked |
|---|---|---|---|
| Camco RhinoFLEX 20-ft sewer hose kit | 9.0 | A complete 20-foot dump hose with a clear elbow | 2026-11-10 |
| Valterra Dominator 20-ft sewer hose kit | 8.8 | A 20-foot kit with compact rotating fittings | 2026-11-10 |
| Camco Sidewinder sewer hose support | 8.6 | Holding a 3-inch hose at a downhill slope | 2026-11-10 |
A quarter inch of drop per foot is the usual minimum so liquids and solids keep moving. Steeper is fine. Flatter needs the RV end lifted on a support. The calculator does that subtraction for you.
You can, if the run is supported and the hose is not a trip line. A lot of people still dump and stow, because a hose left in the sun gets stiff and a hose left in a low spot holds waste. Caps go on either way.